Attention! Before starting works on dismantling and installing the bushings, note the location of the bushings in the steering rack. Bushings (1-20-975/1188/1195/1292/2010/3000) are different to original, manufactured without outer metal shell and are installed into steering rack without the usage of old bushing’s outer metal shell.
Dismantling
- Fix the steering rack in the bench screw.
- Bend the outer metal shell of the bushing in two opposite places using hammer and chisel.
- Remove bushing from the steering rack.
- After the dismantling inspect and clean the bearings in the steering rack from rust, dirt and burrs.
Dismantling
- Fix the steering rack in the bench screw.
- Bend the outer metal shell of the bushing in two opposite places using hammer and chisel.
- Remove bushing from the steering rack.
- After the dismantling inspect and clean the bearings in the steering rack from rust, dirt and burrs.
Installation
- Lubricate the new bushings’ outer surface and bearings in the steering racks with the grease supplied in the kit, or any other consistent grease.
- Install new bushings in the bearings of steering rack taking into account their original location.
Attention! Tightening force is according to the manufacturer’s recommendations.
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.
